Detection Of Latent Fingerprints Research Articles

Synthesis of phenol formaldehyde resin (PFR) based fluorescence resonance energy transfer (FRET) composites for double channel detection of latent fingerprints.

A reversible two-channel fluorescent nanocomposite with fluorescence resonance energy transfer (FRET) effect was designed for the development, analysis, and characterization of latent fingerprints (LFPs). For the construction of the FRET probe, a core of mesoporous silicas (MSNs) were used to encapsulate the organic dye rhodamine 6G (RhD-6) as an acceptor, while green-emitting monodisperse phenolic resin nanoparticles (PFR NPs) were selected as a donor. The up-conversion material (UC) of NaYF4:Yb,Er was synthesized using a simple hydrothermal method, and the MSNs-RhD-6/PFR (PRM) was electrostatically adsorbed onto the UC nanoparticles using a layer-by-layer method to obtain MSNs-RhD-6/PFR-UC (PMU). Compared to ordinary single-channel materials, PMU can be excited by different light sources (365 nm UV/980 nm laser) and its fluorescence can be reversibly switched between yellow and green, demonstrating excellent light reversibility. The PMU composites were successfully used to visualize and detect LFPs on various substrate surfaces using a simple powder coating method. Due to the existing FRET effect and dual-channel characteristics, this composite material displays excellent contrast, outperforming commercially available products for wider applicability. Even on complex backgrounds and after aging or washing treatments, it still clearly recognizes fingerprints in first-, second-, and third-level details, showing its great potential in latent fingerprint detection.

Modified powder suspensions for fingermark detection on adhesive tapes in austere or contested environments

ABSTRACT Pressure-sensitive adhesive tapes may be associated with a wide range of criminal and terrorist activity as physical evidence. In this study, a carbon powder suspension formulation for the detection of latent fingermarks on the adhesive side of tapes was modified by using consumer products as alternative surfactant sources. The modified formulations were used to successfully develop latent fingermarks deposited on transparent adhesive tape. This project ultimately intends to establish the performance windows of the modified techniques to allow evidence-based decision-making during technical exploitation in contested and austere environments.

Frugal forensics: addressing the challenges of sustainable forensic science service provision

ABSTRACT Forensic science is an essential service in supporting criminal investigations and the justice system. It also has global humanitarian, peace and security dimensions making it a key factor in achieving several United Nations Sustainable Development Goals. Despite forensic science’s universal value, many jurisdictions are at a stark disadvantage in the continued development of forensic science with limitations in resourcing and technological capabilities. To address this challenge, we have proposed the concept of frugal forensics, which we have applied to latent fingermark detection. We argue that the sustainable provision of forensic science must become a critical element of future international discourse.

Red Emitting Solid-State CDs/PVP with Hydrophobicity for Latent Fingerprint Detection.

Fluorescent carbon dots (CDs) are a new type of photoluminescent nanomaterial. Solid-state CDs usually undergo fluorescence quenching due to direct π-π* interactions and superabundant energy resonance transfer. Therefore, the preparation of solid-state fluorescent CDs is a challenge, especially the preparation of long wavelength solid-state CDs. In this research, long wavelength emission CDs were successfully synthesized by solvothermal methods, and the prepared CDs showed good hydrophobicity. The composite solid-state CDs/PVP (Polyvinyl pyrrolidone) can emit strong red fluorescence, and the quantum yield (QY) of the CDs/PVP powder reaches 18.9%. The prepared CDs/PVP solid-state powder was successfully applied to latent fingerprint detection. The results indicate that the latent fingerprints developed by CDs/PVP powder have a fine definition and high contrast visualization effect, which proves that the prepared CDs/PVP has great application potential in latent fingerprint detection. This study may provide inspiration and ideas for the design of new hydrophobic CDs.

Further research into alternative carrier solvents for the detection of latent fingermarks

A number of solvents, (Solstice PF, Opteon SF33 and Amolea AS-300), are compared to the recommended carrier solvent of HFE7100 for the ninhydrin and 1,2-indandione formulations. As the supply of HFE7100 will cease by the end of 2025, suitable alternatives are required in the short-term to ensure the detection of latent fingermarks on porous surfaces is still effective. Although these solvents, with the exception of Amolea AS-300, are classified as per- and polyfluoroalkyl substances (PFAS); they are not classed as hazardous. The alternatives in this study have a low global warming potential and atmospheric lifetime and are volatile, non-flammable and non-ozone depleting, in addition to other desirable properties such as a high wetting-index. During Phase 2 trials with deposited fingermarks, HFE7100 provided the best performing results followed by Opteon SF33, Solstice PF and Amolea AS-300. A significant difference with a negligible effect size was observed for ninhydrin formulations (p-value 0.00179; ε2 0.00418) while a significant difference with a weak effect size was observed for 1,2-indanedione formulations (p-value 2.095 ×10−10; ε2 0.0167). Furthermore, HFE7100 provided the least ink diffusion and the brightest 1,2-indanedione luminosity (significant difference with a moderate effect size p-value 1.772 ×10−13; ε2 0.0434) but the HFE formulation turned cloudy more quickly and needed regular replacements. Phase 3 pseudo-operational trials of 100 porous items followed a similar trend whereby HFE7100 formulations detected the highest number of marks followed by Opteon SF33 and Solstice PF. Although HFE7100 is still the best performing carrier solvent, this study demonstrates that, in the short-term, Opteon SF33 and Solstice PF may have potential as non-flammable replacement carrier solvents while developing the long-term goal of solvent-less methods.

Efficient tunable white emission and multiple reversible photoluminescence switching in organic Tin(IV) chlorides via regulating the host lattice environment of antimony ions for multifunctional applications

The host lattice environments of Sb3+ has a great influence on its photophysical properties. Here, we synthesized three zero-dimensional organic metal halides of (TPA)2SbCl5 (1), Sb3+-doped (TPA)SnCl5(H2O)·2H2O (Sb3+-2), and Sb3+-doped (TPA)2SnCl6 (Sb3+-3). Compared with the intense orange emission of 1, Sb3+-3 has smaller lattice distortion, thus effectively suppressing the exciton transformation from singlet to triplet self-trapped exciton (STE) states, which makes Sb3+-3 has stronger singlet STE emission and further bring a white emission with a photoluminescence quantum efficiency (PLQE) of 93.4 %. Conversely, the non-emission can be observed in Sb3+-2 even though it has a similar [SbCl5]2- structure to 1, which should be due to its indirect bandgap characteristics and the effective non-radiative relaxation caused by H2O in the lattice. Interestingly, the non-emission of Sb3+-2 can convert into the bright emission of Sb3+-3 under TPACl DMF solution treatment. Meanwhile, the white emission under 315 nm excitation of Sb3+-3 can change into orange emission upon 365 nm irradiation, and the luminescence can be further quenched by the treatment of HCl. Therefore, a triple-mode reversible luminescence switch of off-onI-onII-off can be achieved. Finally, we demonstrated the applications of Sb3+-doped compounds in single-component white light illumination, latent fingerprint detection, fluorescent anti-counterfeiting, and information encryption.

Wet SPF: A wet powder suspension for the detection of latent fingermarks on the sticky side of adhesive tape for use in Seychelles

WET UCIO is an inexpensive carbon-based powder suspension, reportedly as effective as commercially available formulations for latent fingermark detection on the sticky side of adhesive tapes. However, the surfactant solution used in WET UCIO is not readily accessible outside Europe, limiting its use in Seychelles or other non-European jurisdictions. In this study, the UCIO formulation was modified based on a ‘frugal forensic’ approach, by replacing the surfactant solution with an in-house sodium dodecyl sulfate solution prepared in 5% aqueous ethanol. A comparative assessment against Wetwop™ using eight different pressure-sensitive adhesive tapes found that the modified formulation was at least as effective as commercial powder suspension. Modifying this technique under the frugal forensic framework has enhanced its accessibility to other jurisdictions and is recommended for validation in Seychelles.

Dual-channel fluorescent probe utilizing hydrazone for Zn2+ and Hg2+ detection: Exploring distinct signaling mechanisms and applications in bioimaging and latent fingerprint analysis

A facile Schiff base probe C1 has been developed and evaluated using 1H, 13C NMR, and mass spectroscopy. Fluorescence investigations were conducted to determine probe-sensing behavior. Probe C1 demonstrated sensitive, and selective recognition of Zn2+ and Hg2+ ions by using two distinct processes (i.e., chelation enhanced fluorescence effect and fluorescence quenching) over other cations in ACN-H2O (8:2, v/v). The Zn2+ and Hg2+ detection limits of 0.042 and 0.081 μM are achieved with the probe C1. C1 has a binding constant of 3.33 × 103 M−1 for Zn2+ and an emission quenching constant of 1.22 × 104 M−1 for Hg2+. A Jobs plot was used to determine the binding stoichiometry of C1 and Zn2+/Hg2+ ions ratio is 1:1. By using Zn2+/Hg2+ and EDTA additions alternately, the probe's reusability was investigated. Moreover, the probe was found to be highly cytocompatibility using an MTT assay in a mouse fibroblast cell line (NIH3T3). Further, the probe was found to visualize Zn2+ and Hg2+ ions inside the cells, indicating the potential application of the probe as an intracellular probe to detect Zn2+ and Hg2+ ions. The probe shows very good solid-state emission behavior, this motivates us to develop latent fingerprint detection and anticounterfeiting applications.

An AIEE-active Triphenylethylene Derivative with Photoresponsive Character for Latent Fingerprints Detection via a Simple Soaking Method.

Latent fingerprints (LFPs) is one of the most important physical evidence in the criminal scene, playing an important role in forensic investigations. Therefore, developing highly sensitive and convenient materials for the visualization of LFPs is of great significance. We designed and synthesized an organic fluorescent molecule TP-PH with aggregation-induced enhanced emission (AIEE) activity. By simply soaking, blue fluorescent images with high contrast and resolution are readily developed on various surfaces including tinfoil, steel, glass and plastic. Remarkably, LFPs can be visualized within 5min including the first-, second- and tertiary-level details. In addition, TP-PH exhibits interesting photoactivated fluorescence enhancement properties. Under irradiation of 365nm UV light with a power density of 382 mW/cm2, the fluorescence quantum yield displays approximately 21.5-fold enhancement. Mechanism studies reveals that the photoactivated fluorescence is attributed to the irreversible cyclodehydrogenation reactions under UV irradiation. This work provides a guideline for the design of multifunctional AIEE fluorescent materials.

Development of reddish orange-emitting Y2Sn2O7:Eu3+phosphors for latent fingerprint detection and anti-counterfeit security ink

In forensic science, fingerprint detection and anti-counterfeiting technologies are crucial. Inorganic phosphors are potentially suitable materials for high-quality visualization and security. We synthesized novel Y2Sn2O7:Eu3+ (YSO:Eu3+) phosphors by a sol–gel method. They have a cubic structure and emit reddish orange emission from the Eu3+ ions electronic transition of 5D0→7F1. The optimal doping concentration of Eu3+ is 7 mol% and dipole-dipole interaction causes the quenching mechanism. The chromaticity coordinates of YSO:7Eu3+ phosphor are (0.6086, 0.3906). We used the optimized YSO:7Eu3+ phosphors for forensic applications, such as latent fingerprints and security ink. The latent fingerprints stained with YSO:7Eu3+ phosphors showed clear images and reliable level 1–3 characteristics. The security ink was visible on different surfaces. Our results indicate that the YSO:7Eu3+ phosphor can be used for visualizing latent fingerprints and anti-counterfeiting applications.

Large‐Scale Room‐Temperature Synthesis of the First Sb3+‐Doped Organic Ge(IV)‐Based Metal Halides with Efficient Yellow Emission for Solid‐State Lighting and Latent Fingerprint Detection

Organic–inorganic hybrid Ge(II)‐based metal halides have garnered significant interest due to their intriguing photophysical properties and environmentally friendly characteristics. However, challenges such as poor stability, low emission intensity, and a complex synthesis process have hindered their widespread application. In addressing these issues, a breakthrough in the large‐scale production of Sb3+‐doped Ge(IV)‐based metal halide (C13H14N3)2GeCl6 phosphors at room temperature through a straightforward solution method is presented. The synthesized compound exhibits a remarkable bright broad yellow emission band at 590 nm, boasting a photoluminescence quantum efficiency of 99.53 ± 0.06% the highest among Ge(IV)‐based metal halides. Notably, the introduction of Sb3+ induces the formation of Jahn–Teller‐like self‐trapped excitons in [SbCl6]3− species, attributable to lattice distortion and strong electron–phonon coupling. Consequently, Sb3+‐doped (C13H14N3)2GeCl6 demonstrates a large Stokes shift (221 nm) and a prolonged decay lifetime (3.06 μs). Furthermore, the Sb3+‐doped compound exhibits commendable chemical‐ and photostability, prompting exploration in applications such as white light‐emitting diodes and latent fingerprint detection. This work not only provides a practical approach for designing economically viable, environmentally friendly, and highly efficient emission phosphors but also paves the way for novel directions in their expanded application.

Deep blue emission and latent finger print detection analysis of zinc gallate nanoparticles

For the first time, Zinc Gallium Oxide is synthesized using LeucasAspera leaves extract as a reducing agent followed by the calcination at 500∘C. The structural, morphological, and optical properties are discussed. The Bragg reflections confirm that ZGO gets crystallized in pure cubic form. The surface morphology consists of agglomerated NPs. The direct energy band gap was found to be 3.1 eV. The photoluminescence analysis excited under 233 nm, and CIE values fall in the blue region of visible spectra. The CCT value was found to be 2748 K which might find an application as a nanophosphor in warm light-emitting diodes. Further, the powder dusting method was employed to collect the latent fingerprints (LFPs) on the pores and non-pores surfaces under UV as well as in day light. The synthesized ZGO exhibits well-resolved ridge patterns that can be used to identify LFPs with clarity. From all these results, the present synthesized ZGO NPs might find an application in display technology as a blue nanophosphor material and for LFP detection in crime investigation.

Technical note: A preliminary assessment of UV-C imaging using the Full Spectrum Imaging System (FSIS-II) for the detection of latent fingermarks

The Full Spectrum Imaging System (FSIS-II) was assessed for the detection of latent fingermarks on a variety of substrates, specifically focusing on UV-C imaging for untreated marks and those that have been treated with cyanoacrylate (CA). The use of UV-C was effective at the detection of latent fingermarks on a variety of substrates and UV-C imaging may be effective when UV-A does not provide any fingermark detections on thermal paper. A Phase 2 and a small Phase 3 trials on aluminium cans were carried out with a detection sequence of UV-C imaging, CA fuming, UV-C imaging, UV-A imaging and BY40. For Phase 2 laboratory trials, the use of initial UV-C reflection was effective at removing the background and was a useful tool for initial screening. The use of UV-C was superior to UV-A after CA fuming and provided the highest overall number of high-quality marks. For phase 3 trials, the results showed that BY40 fluorescence was marginally more effective than UV-C imaging of CA-treated marks. This preliminary study shows that the FSIS-II and UV-C imaging can complement other methods for the detection of latent fingermarks.

Progress towards blue emitting MgO-ZnO-Ga2O3 nanocomposites synthesized by bio mediated route

MgO-ZnO-Ga2O3 nanocomposites are synthesized by solution combustion method using Aloe Vera gel as a reducing agent to increase the efficiency of blue emission. The appearance of Bragg reflections corresponding to MgO, ZnO and Ga2O3 clearly indicates the formation of nanocomposites. The surface morphology consists irregular shape and sized NPs. The Energy dispersive X-ray analysis confirms the purity of the sample. The band energy gap was tuned to 3.1 eV. The Photoluminescence excitation and emission spectra was discussed and compared it with emission spectra of individual oxides as well as with other reported blue emitted nanophosphors. Further, the chromaticity coordinates and Color correlated temperature coordinates clearly confirms their warm blue emission. Further, the powder dusting method was employed to collect the latent fingerprints on the pores and non-pores surfaces. The synthesized MgO-ZnO-Ga2O3 nanocomposites exhibits well-resolved ridge patterns that can be used to identify latent finger prints with clarity. From all these results, the present synthesized MgO-ZnO-Ga2O3 nanocomposite might find an application in display technology as a blue nanophosphor material and for latent finger print detection in crime investigation.

A novel highly thermal-stable Ba2GdSbO6:Sm3+ phosphor with intrinsic deep-red emission for personal identification and plant cultivation LEDs

The novel Sm3+-activated Ba2GdSbO6 (BGSO) antimonate phosphors with double perovskite structure were first synthesized via a high-temperature solid-state reaction. The products' crystallographic structure, phase purity, micro-morphology, and luminescent properties were analyzed. The Ba2GdSbO6:Sm3+ phosphor could be effectively excited by 406 nm irradiation, and four sharp peaks accompanied by a broad band were presented. The dominant peak was located at 602 nm, corresponding to the typical 4G5/2 → 6H7/2 transition of Sm3+ ions, while the deep-red emission band at 675 nm is owing to the BGSO host intrinsic emission. Impressively, the product shows high thermal stability with its emission intensity of 88.8% at 420 K. Moreover, its thermal quenching temperature exceeds 480 K. The electroluminescent spectrum of the red light-emitting diode (LED) device fabricated by BGSO:0.02Sm3+ overlapped well with the absorption spectra of the phytochromes, suggesting its potential for plant cultivation light source. The sample with the best doping concentration was selected for surface modification with oleic acid (OA). In latent fingerprint and lip print detection, the phosphor showed high resolution, high contrast, and low background interference applied on different substrates. Hence, the BGSO:Sm3+ phosphor can be considered a promising material in plant cultivation LEDs and latent fingerprint and lip print visualization.

PEG-coated NaYF4:Tm3+/Yb3+ upconversion nanoparticles for OCT image contrast enhancer, optical thermometry, and security applications

Polyethylene glycol (PEG) coated NaYF4:Tm3+/Yb3+ upconversion nanoparticles (UCNPs) were synthesized, and their usefulness in improving image contrast in Swept source optical coherence tomography (SS-OCT) and photo-thermal (PT-OCT) imaging was assessed. Synthesized UCNPs have shown biocompatibility with a cell survival rate of more than 90% after 24 h of incubation of HeLa cells. Prepared particles have shown intense blue upconversion emission along with a photo-thermal conversion efficiency of 30.4%. Leveraging these UCNPs, enhancements in image quality were achieved in both SS-OCT and PT-OCT imaging modalities, manifesting improved scattering coefficients and contrast-to-noise ratios. Temperature-dependent upconversion emission spectra were used to assess temperature sensing and thermal sensitivity of 107×10-3 K-1 at 300 K is obtained for the synthesized nanoparticles. Additionally, these UCNPs have demonstrated utility in latent finger-marks detection and anti-counterfeiting applications.

Harnessing fluorescent carbon quantum dots from natural resource for advancing sweat latent fingerprint recognition with machine learning algorithms for enhanced human identification.

Nowadays, it is fascinating to engineer waste biomass into functional valuable nanomaterials. We investigate the production of hetero-atom doped carbon quantum dots (N-S@MCDs) to address the adaptability constraint in green precursors concerning the contents of the green precursors i.e., Tagetes erecta (marigold extract). The successful formation of N-S@MCDs as described has been validated by distinct analytical characterizations. As synthesized N-S@MCDs successfully incorporated on corn-starch powder, providing a nano-carbogenic fingerprint powder composition (N-S@MCDs/corn-starch phosphors). N-S@MCDs imparts astounding color-tunability which enables highly fluorescent fingerprint pattern developed on different non-porous surfaces along with immediate visual enhancement under UV-light, revealing a bright sharp fingerprint, along with long-time preservation of developed fingerprints. The creation and comparison of latent fingerprints (LFPs) are two key research in the recognition and detection of LFPs, respectively. In this work, developed fingerprints are regulated with an artificial intelligence program. The optimum sample has a very high degree of similarity with the standard control, as shown by the program's good matching score (86.94%) for the optimal sample. Hence, our results far outperform the benchmark attained using the conventional method, making the N-S@MCDs/corn-starch phosphors and the digital processing program suitable for use in real-world scenarios.

L-histidine doped CDs from Zingiber Montanum using hydrothermal method to enhance its antimicrobial activity and imply for latent fingerprint detection

Carbon dots (CDs) from Zingiber Montanum as a natural resource were prepared and tested as an antimicrobial activity with various types of bacteria. Then nitrogen doped carbon dots (N-CDs) were subject to obtain from the plant extract doped with L-histidine using hydrothermal method, indicating their N-CDs fluorescence intensity increases, and can be visualized more brightness under UV lamp compared with its bare CDs. Besides its antimicrobial purpose, fingerprint image is utmost known as one of the important characteristics of the crime evident, in this study, the N-CDs are then aimed to apply on various non-porous material surfaces for latent fingerprint detection. It was shown that the fine powder of N-CDs mixed with starch give more detailed minutiae compared with that from black commercial powder. The applicable fingerprint tracer using this N-CDs/starch powder shows a bit long time clear results until 90 days, indicating that the new N-CDs developed enhances much more the fingerprint performance than its usual. In addition, to confirm the antimicrobial activity the N-CDs alone were also used for such antimicrobial testing via agarose disk diffusion assay against both gram negative and gram-positive bacteria, resulted satisfactorily that this nanomaterial can be a high potential use for antibacterial activity.

Development of dual-channel fluorescent mesoporous SiO2 nanosphere-coated yttrium aluminum garnet composites for sensitive detection of latent fingerprints.

In this study, we investigated the detection of latent fingerprints (LFPs) using green light- and near-infrared (NIR) light-induced up/down-conversion dual-channel composites. Upconverted yttrium aluminium garnet (YAG) was prepared using a citric acid-assisted sol-gel method. After loading rhodamine 6G (RhD-6) into mesoporous silica nanospheres (MSNs), the MSNs-RhD-6 composites were coated with the as-synthesised YAG via electrostatic adsorption using the layer-by-layer method, demonstrating reversible switching between yellow and green light waves under 525 nm green light or 980 nm laser excitation. To evaluate the effectiveness of YAG-MSNs-RhD-6 powder in criminal investigations, we conducted simulations for different fingerprint scenarios. The results indicated that even after prolonged aging (up to 20 days), exposure to water, or high-temperature baking, the fingerprints remained clearly visible in the images. The detection of LFPs on various substrate surfaces exhibited high contrast, with the details of the fingerprints easily observable even after appropriate magnification. This study opens a new path for green light- and near-infrared light-induced up/down-conversion dual-channel composites for optical applications.

A difluoroboron compound with latent fingerprint detection and inkless writing based on aggregation-induced emission enhancement and mechanofluorochromic behavior

A pyridine-based difluoroboron compound with the TPA group displayed excellent AIEE activity and MFC behavior, which was applied for latent fingerprint detection and inkless writing.